Automation of FDU
and driver identification system

GPS MONITORING SYSTEMS

Introduction

TEH KONTROL offers a comprehensive solution for the FDU automation.

Special equipment and a card reader installed on the FDU at the enterprise gives you the opportunity to:

- identify the vehicle and the driver (fuelling is possible only by card);
- produce reports on completed refueling.

TEH KONTROL experts are engaged in the FDU installation and re-equipment at the enterprise.

We produce fuel tanks to order.

We complete gas stations with a meter, a crane (gun), and a hose; we mount and connect additional devices so that you can get data in the GPS monitoring system, such as: place, time, and volume of fuel dispensed.

How does it work?

Each driver has a special plastic RFID card, which is included in the TEH KONTROL GPS monitoring system.
This card is required to identify the driver. The driver applies the card to the reader at the gas station, and the identification begins. They type the required fuel volume on the keyboard and receive it. Data about the operation is transmitted to the system and then is sent to the server.

The dispatcher can generate a report remotely.

Data on reports

- Duration and exact refueling time;
- Gas station location;
- Vehicle and driver data;
- Dispensed fuel volume in liters.

Additionally, you can configure the following data:

- Dispensed fuel volume in tank.
- Odometer and engine hours at the refueling time.
- The amount of fuel in the tank before and after refueling.

Contact us

Leave your message and we will contact you soon!